Carbide Saws  Speedcut Saw Blades

Speedcut Carbide Blades and Blade Repair Services

• CARBIDE-TIPPED SAW BLADES

• CARBIDE-TIPPED THIN-KERF SAW BLADES

• SEGMENTAL SAW BLADES

• SOLID HIGH SPEED STEEL SAW BLADES

• FRICTION AND HOT SAW BLADES

Making the Cut since 1980

When it comes to sawing, a sharp blade makes all the difference. That's why Speedcut was started over 25 years ago.

This division of AME's Carbide Saws Design and Build Group sells and services saw blades in a variety of styles and tooth configurations. New carbide, cermet and thin-kerf blades are available from Speedcut, along with complete in-house facilities for sharpening, re-tipping and repairing older blades.

Speedcut can build and service blades from 12" to as large as 80 inches in diameter, so whatever your application, you can make sure your blades are always sharp and ready for the rigors of high-speed, high-volume cutting.

Specifications for Standard Blade Blanks Carbide Tipped Saw Blades for Ferrous Materials
Diameter		Maximum No. of Teeth	Blade Body Thickness		Kerf
inch	mm		inch	mm	inch	mm
11	285	80	0.120	3.0	0.180	4.5
14	360.0	90	0.120	3.0	0.180	4.5
16	400.0	100	0.120	3.0	0.180	4.5
18	457.2	110	0.150	3.8	0.230	5.8
20	508.0	120	0.150	3.8	0.230	5.8
22	558.8	120	0.160	4.1	0.240	6.1
24	609.6	130	0.160	4.1	0.240	6.1
26	660.4	130	0.180	4.6	0.260	6.6
28	711.2	130	0.180	4.6	0.260	6.6
30	762.0	140	0.180	4.6	0.260	6.6
32	812.8	140	0.200	5.1	0.280	7.1
34	863.6	140	0.200	5.1	0.280	7.1
36	914.4	160	0.220	5.6	0.300	7.6
38	965.2	160	0.220	5.6	0.300	7.6
40	1016.0	180	0.220	5.6	0.300	7.6
42	1066.8	180	0.230	5.8	0.310	7.9
44	1117.6	180	0.230	5.8	0.310	7.9
46	1168.4	200	0.250	6.4	0.330	8.4
48	1219.2	200	0.250	6.4	0.330	8.4
50	1270.0	210	0.250	6.4	0.330	8.4
52	1320.8	210	0.280	7.1	0.360	9.1
54	1371.6	220	0.280	7.1	0.360	9.1
56	1422.4	220	0.300	7.6	0.380	9.7
58	1473.2	220	0.300	7.6	0.380	9.7
60	1524.0	240	0.300	7.6	0.380	9.7
62	1574.8	240	0.320	8.1	0.400	10.2
64	1625.6	240	0.320	8.1	0.400	10.2
66	1676.4	240	0.320	8.1	0.400	10.2
68	1727.2	240	0.320	8.1	0.400	10.2
70	1778.0	240	0.320	8.1	0.400	10.2

Design/Build Services

Speedcut designers can look at your unique application, take into account the kind of materials you cut, evaluate shop floor requirements and saw specifications. Our bladesmiths use proprietary blade manufacturing techniques to produce blades that are part art, part engineering, and designed to fit your application perfectly.

Reconditioning Services

Speedcut brings new life to old blades. Our proprietary welding techniques allow us to restore a blade even when teeth,pockets, shoulders and tips are missing. Blades that seem damaged beyond repair can often be restored by Speedcut and put back in service at a fraction of the cost of buying new. Virtually any size blade can be fully reconditioned from blade tip to blade body, so it's ready to cut ferrous and non-ferrous materials, bars or billets, rails, profiles, pipes and tubes.

And reconditioning services at Speedcut go beyond the blade to address how saws are used in the real world. If saw blades aren't holding up - if teeth are chipping, tips are breaking, cutting speed is dropping - our technicians can often provide suggestions to help you get better performance from your equipment. If a blade is truly at the end of its life, we'll help you understand your options and choose a replacement if necessary to improve your tool life. In every case, our experience works for you.

Double-Chip Geometry

Speedcut's original patent of double-chip blade design represented a breakthrough in speed and quality for carbide-tipped blade applications. Our unique "notch grind" tooth geometry improves the efficiency of blades and saws by allowing each uniform tooth to cut the full width of the saw slot. Compared to older triple-chip geometry, this design allows feed rates to be doubled while reducing saw vibration, producing a higher quality cut.

Keep your edge. Call Speedcut.

For any company that measures success in the material it cuts, Speedcut can provide not just a sharp blade edge but also a significant competitive edge. Please call today and let us show you how our products and services are a cut above.

Standard Saws

Automated Saws

Machine Rebuilding services

Contact Us

1-815-962-6076 (toll free USA 1-800-225-4263)

Speedcut Brochure 542KB

Printable Version