OTT / Spindle Interface  HSK Tools

Toolholders with hollow taper shank - HSK

Collet Chuck HSK - A End Mill Holder Weldon HSK - A Combi - Shell Mill Holder HSK - A Hydraulic Chuck HSK - A

HSK Adaptor DIN 69893 Form A	.
	Form A, Preferred type for machining centers! V-Flange design for - automatic tool change - drive keys at the end of cone - central coolant throughout with coolant tubes Coolant Tubes (ordered separately) Note: HSK tools from A / B and E can be equipped with coolant through tube to lead coolant directly through the spindle to the cutting tool without leaking. The HSK connection stays dry and clean.
d1 d2 d10 I1 I6 f1 f2 b1 b2 b3 h1 32 24 26 16 8.92 20 35 7.05 7 9 13 40 30 34 20 11.42 20 35 8.05 9 11 17 50 38 42 25 14.13 26 42 10.54 12 14 21 63 48 53 32 18.13 26 42 12.54 16 18 26.5 80 60 67 40 22.85 26 42 16.04 18 20 34 100 75 85 50 28.56 26 42 20.02 20 22 44

Back to Top
Collet chuck HSK - A for collets ER/ESX type ER/ESX DIN 6499
	Part-No HSK ER Clamping Range A D 603202-1 32 16 1/10 80 28 604002-01 40 16 1/10 80 28 604002-02 40 25 1/16 80 42 604002-03 40 32 2/20 100 50 605002-01 50 16 1/10 100 28 605002-02 50 25 1/16 100 40 605002-03 50 32 2/20 100 50 606302-01 63 16 1/10 100 28 606302-11 63 16 1/10 160 28 606302-02 63 25 1/16 100 40 606302-03 63 32 2/20 100 50 606302-04 63 40 4/26 120 63 608002-01 80 32 2/20 100 50 608002-02 80 40 4/26 120 63 610002-01 100 16 1/10 100 28 610002-11 100 16 1/10 160 28 610002-02 100 25 1/16 100 42 610002-03 100 32 2/20 100 50 610002-04 100 40 4/26 120 63

Back to Top
End mill holder Weldon HSK - A for straight shank tools DIN 1835B
Part-No HSK D1(H4) A D2 603204-01 32 6 60 25 603204-02 32 8 60 28 603204-03 32 10 65 35 604004-01 40 6 60 25 604004-02 40 8 60 28 604004-03 40 10 60 35 604004-04 40 12 70 42 604004-05 40 14 75 42 604004-06 40 16 75 48 605004-01 50 6 65 25 605004-02 50 8 65 28 605004-03 50 10 65 35 605004-04 50 12 80 42 605004-05 50 14 80 42 605004-06 50 16 80 48 605004-07 50 18 80 48 605004-08 50 20 80 52 Part-No HSK D1(H4) A D2 610004-01 100 6 80 25 610004-02 100 8 80 28 610004-03 100 10 80 35 610004-04 100 12 80 42 610004-05 100 14 80 42 610004-06 100 16 100 48 610004-07 100 18 100 48 610004-08 100 20 100 52 610004-10 100 25 100 65 610004-11 100 32 100 72 610004-12 100 40 100 90	Part-No HSK D1(H4) A D2 606304-01 63 6 65 25 606304-02 63 8 65 28 606304-03 63 10 65 35 606304-04 63 12 80 42 606304-05 63 14 80 42 606304-06 63 16 80 48 606304-07 63 18 80 48 606304-08 63 20 80 52 606304-10 63 25 110 65 606304-11 63 32 110 72 60804-01 80 6 80 25 60804-02 80 8 80 28 60804-03 80 10 80 35 60804-04 80 12 80 42 60804-05 80 14 80 42 60804-06 80 16 100 48 60804-07 80 18 100 48 60804-08 80 20 100 52 60804-10 80 25 100 65 60804-11 80 32 110 72

Back to Top
Combi - shell mill holder HSK - A
Part-No. HSK D1 A A1 D2 I1 I2 603206-01 32 16 55 45 32 17 27 603206-02 32 22 55 43 40 19 31 603206-03 32 27 65 53 48 21 33 604006-01 40 16 50 40 32 17 27 604006-02 40 22 50 38 40 19 31 604006-03 40 27 65 53 48 21 33 605006-01 50 16 50 40 32 17 27 605006-02 50 22 50 38 40 19 31 605006-03 50 27 65 53 48 21 33 605006-04 50 32 65 51 58 24 38 606306-01 63 16 60 50 32 17 27 606306-02 63 22 60 48 40 19 31 606306-03 63 27 60 48 48 21 33 606306-04 63 32 60 46 48 24 38 606306-05 63 40 70 56 70 27 41	Part-No. HSK D1 A A1 D2 I1 I2 608006-01 80 16 60 50 32 17 27 608006-02 80 22 60 48 40 19 31 608006-03 80 27 60 48 48 21 33 608006-04 80 32 60 46 58 24 38 608006-05 80 40 70 56 70 27 41 610006-01 100 16 60 50 32 17 27 610006-02 100 22 60 48 40 19 31 610006-03 100 27 60 48 48 21 33 610006-04 100 32 60 46 58 24 38 610006-05 100 40 70 56 70 27 41 610006-06 100 50 80 64 90 30 46
	.

Back to Top
Hydraulic chuck HSK - A For mounting straight shank tools according to DIN 1835 type A and B and DIN 6535 type HA and HB. Shanks according to DIN 6536 type HE can only be used in combination with reduction sleeves.
Part-No. HSK D A 605023-01 50 6 80 605023-02 50 8 80 605023-03 50 10 85 605023-04 50 12 90 605023-05 50 14 90 605023-06 50 16 95 605023-07 50 18 95 605023-08 50 20 100 606323-01 63 6 80 606323-02 63 8 80 606323-03 63 10 85 606323-04 63 12 90 606323-05 63 14 90 606323-06 63 16 95 606323-07 63 18 95 606323-08 63 20 100 606323-09 63 25 115 606323-10 63 32 120 Note: Runout of D max 0.003mm at 3xD
	Part-No. HSK D A 610023-01 100 6 85 610023-02 100 8 85 610023-03 100 10 90 610023-04 100 12 95 610023-05 100 14 95 610023-06 100 16 100 610023-07 100 18 100 610023-08 100 20 105 610023-09 100 25 115 610023-10 100 32 120	Reductions Part-No. D Diameter Redcution Sleeve 2320-01 20 6 2320-02 20 8 2320-03 20 10 2320-04 20 12 2320-05 20 14 2320-06 20 16 2316-01 16 6 2316-02 16 8 2316-03 16 10 2316-04 16 12 Inch size reduction sleeves are avail on request.

Back to Top

Printable Version