Clamping Sleeves IL

IL Clamping Sleeves by SPIETH

Reliable and Affordable

  • Actuation: External by connecting components

  • Initiation of clamping force: From shaft

  • Inch and metric available

  • Design: Long

 

Inch Specs & CAD

IL Series - Inch

Special or larger sizes available upon request.

Clamping Sleeve IL - Inch
Type

Click Part # for CAD		 Inside Diam. d1H6 Outside Dia. d2 H5 Sleeve Length R Applied Compression Force Fc (lbs) IL Mass Moment of Inertia

IL Transmissable

 **Tolerances of Mating Components
Torque Ax. Load Shaft Dia. Hub Bore
L lb•in2 M (ft.-lbs.) F (lbs.) h5 H6

IL-0.38 X 0.63

 .3750 .6250 .750 .02 4000 0.009 13 950 +.0000/-.0002 + .0004

-.0000

+.0005

-.0000
IL-0.44 X 0.69 .4375 .6875 .750 .02 4000 0.011 17 1100 + .0000
– .0003
IL-0.50 X 0.75 .5000 .7500 .750 .02 4000 0.016 23 1300
IL-0.56 X 0.88 .5625 .8750 .875 .02 4000 0.048 27 1400
IL-0.63 X 1.00 .6250 1.000 .875 .02 4400 0.147 34 1750
IL-0.69 X 1.19 .6875 1.1875 1.000 .02 4800 0.175 70 2550 + .0006
– .0000
IL-0.75 x 1.25 . 7500 1.250 1.000 .04 4800 0.225 80 2800 + .0000
– .0004
IL-0.88 x 1.50 .8750 1.500 1.375 .04 4800 0.284 130 3800
IL-1.00 x 1.63 1.000 1.625 1.375 .04 7200 0.329 150 4150
IL-1.13 x 1.75 1.125 1.750 1.375 .04 7200 0.780 200 4650
IL-1.25 x 2.00 1.250 2.000 1.625 .04 13200 1.038 300 6300 + .0007
– .0000
IL-1.38 x 2.25 1.375 2.250 1.625 .04 13200 1.347 350 6750
IL-1.50 x 2.25 1.500 2.250 1.625 .06 13200 1.715 460 7550
IL-1.75 x 2.75 1.750 2.750 2.000 .06 20500 2.641 720 10600
IL-2.00 x 3.00 2.000 3.000 2.000 .06 20500 5.398 1000 11900 + .0000
– .0005
IL-2.25 x 3.50 2.250 3.500 2.500 .06 29500 6.438 1400 15500 + .0009
– .0000
IL-2.50 x 3.50 2.500 3.500 2.000 .06 20500 8.907 1300 13300
IL-2.75 x 4.00 2.750 4.000 2.500 .06 29500 9.087 1750 16500
IL-3.00 x 4.25 3.000 4.250 2.500 .06 29500 11.919 1930 17000
IL-3.25 x 4.50 3.250 4.500 2.500 .06 39000 13.504 2700 22500 + .0000
– .0006
IL-3.50 x 5.00 3.500 5.000 3.000 .06 45500 15.406 3300 24600 + .0010
– .0000
IL-3.75 x 5.25 3.750 5.250 2.625 .06 34500 17.308 3500 22200
IL-4.00 x 5.50 4.000 5.500 3.000 .06 39500 19.210 4050 26700
IL-4.50 x 6.00 4.500 6.000 3.000 .06 39500 21.112 4800 29000
IL-5.00 x 6.50 5.000 6.500 3.000 .06 39500 23.014 6500 33000 + .0000
– .0007
IL-5.50 x 7.00 5.500 7.000 3.000 .06 39500 26.818 7400 35000
IL-6.00 x 7.50 6.000 7.500 3.000 .06 39500 30.938 8400 37000 + .0011
– .0000
IL-6.50 x 7.75 6.500 7.750 3.000 .06 62500 35.058 11000 51300
IL-7.00 x 8.25 7.000 8.250 3.000 .06 62500 39.178 14000 51300
IL-7.50 x 9.00 7.500 9.000 3.625 .06 82000 44.249 19600 62700 + .0000
– .0008
IL-8.00 x 9.50 8.000 9.500 3.625 .06 82000 48.369 20600 62700
IL-8.50 x 10.00 8.500 10.000 3.625 .06 82000 52.489 21100 62700 + .0012
– .0000
IL-9.00 x 10.50 9.000 10.500 3.625 .06 82000 56.609 23100 62700
IL-9.50 x 11.00 9.500 11.000 3.625 .06 82000 60.729 24600 62700
IL-10.00 x 12.00 10.000 12.000 4.000 .06 102000 66.751 32200 78300 + .0000
– .0009

Note:
Limits are based on ISO standards (Increased tolerance range to H7/k7/m7 will decrease transmissible load by 10%)

 

Ordering example inch:
SLEEVE d = 2.00" dia. for 2.00" shaft dia.
D = 3.00" dia. for 3.00" hub bore
Clamping by retainer fasted to shaft
Order: IL 2.00” x 3.00

Ordering example metric:
SLEEVE d1 = 50 mm, d2 = 72 mm and
K = 26 mm:
Order: IK 50 x 72

Metric Specs & CAD

IL Series - Metric

Special or larger sizes available upon request.

Clamping Sleeve IL - Metric
Type

Click Part # for CAD		 Inside Dia. d1

H6

 Outside
Dia.
d2
h5		 Sleeve Length R Applied Compression Force

Fc (N)

 IL Mass Moment of Inertia IL Transmissable **Tolerances of Mating Components
L kg cm2 Torque Ax. Load Shaft Dia. Hub Bore
M (Nm) Fa (N) h5 H6
8 12 19 0.6 10 000 0.015 12 3 000 + 0.000
– 0.006		 + 0.011
– 0.000
10 15 19 0.6 11 000 0.026 21 4 200
12 18 19 0.6 11 800 0.032 35 5 900 + 0.000
– 0.008
14 20 19 0.6 13 400 0.047 49 6 970 + 0.013
– 0.000
15 22 19 0.6 13 700 0.124 54 7 260
16 22 19 0.6 14 900 0.140 64 8 050
18 25 19 0.6 15 900 0.512 80 8 900
20 32 26 1 20 600 0.658 124 12 360 + 0.000
– 0.009		 + 0.016
– 0.000
22 35 26 1 21 700 0.698 143 13 020
25 37 26 1 24 500 0.741 190 15 190
28 40 26 1 26 900 0.759 237 16 950
30 42 26 1 28 300 0.963 272 18 110
32 48 35 1 32 400 2.152 389 24 300 + 0.000
– 0.011
35 52 35 1 34 400 3.038 457 26 140 + 0.019
– 0.000
40 56 35 1 38 900 3.761 599 29 950
45 68 42 1.5 44 700 3.942 804 35 760
50 72 42 1.5 49 400 7.729 988 39 520
55 80 52 1.5 59 000 15.797 1 314 47 790 + 0.000
– 0.013
60 85 52 1.5 63 300 17.319 1 557 51 910 + 0.022
– 0.000
63 88 52 1.5 66 000 26.067 1 725 54 780
65 90 52 1.5 67 700 26.068 1 848 56 870
70 100 62 2 78 800 28.403 2 372 67 770
75 105 62 2 83 400 30.737 2 690 71 720
80 110 62 2 88 100 34.881 3 065 78 650
85 115 62 2 92 700 39.520 3 427 80 650 + 0.000
– 0.015
90 120 62 2 97 200 45.086 3 802 84 500
95 125 62 2 101 800 50.653 4 251 89 500 + 0.022
– 0.000
100 130 62 2 106 500 55.219 4 685 93 700 + 0.025
– 0.000
110 140 62 2 115 700 56.219 5 599 101 800
120 150 62 2 125 000 61.785 6 672 111 200
125 155 62 2 129 600 58.317 7 206 115 300 + 0.000
– 0.018
130 160 62 2 134 300 64.568 7 767 119 500
140 170 62 2 143 500 72.918 9 037 129 100
150 180 62 2 152 800 84.513 10 314 137 520

Note:
Limits are based on ISO standards (Increased tolerance range to H7/k7/m7 will decrease transmissible load by 10%)

 

Ordering example inch:
SLEEVE d = 2.00" dia. for 2.00" shaft dia.
D = 3.00" dia. for 3.00" hub bore
Clamping by retainer fasted to shaft
Order: IL 2.00” x 3.00

Ordering example metric:
SLEEVE d1 = 50 mm, d2 = 72 mm and
K = 26 mm:
Order: IK 50 x 72

Catalog

SPIETH Clamping Sleeves IK/IL/AK/AL

> PDF Catalog 246K

 

 

Contact

Price, Delivery & Technical Questions

Call 815-316-5224
Send an email 

Request a Product CD or Brochure > Form

Shane Hatfield
Product Manager


 

Colleen Tryggestad
Customer Service

 

 

 
 
 
Advanced Machine and Engineering