Compact Toe Clamp Workholding from Mitee-Bite


View CAD Library Download catalog ` Request a Quote
Miteebite Compact Toe Clamp 

Compact Toe Clamps

This cam action fixture clamp provides positive down force while using very little space on a fixture. Work pieces can be clamped in series by using the back surface of a clamp to locate the next work piece.

The hardened steel clamping element has both a smooth surface for machined work pieces and a serrated clamping surface for rougher work. The height of the clamp can be adjusted by milling the slot deeper in the fixture plate.

Metric

Part No. ABCDE†FGHI*Cam
Screw
Total
Distance of
Movement
Mounting
Screws
(Included)
Torque
(N.m.)
Holding
Force
(N.)
Repl.
Cam Screw
Repl.
Square Washer
54110 CAD 43.2 19.0 12.7 25.4 2.3 19.0 6.4 15.75 21.5 50368 1.6 M8x16 LHCS 28.20 8900 50368 21006
54112 CAD 54.0 25.4 11.4 33.5 2.8 25.4 9.7 15.75 24.4 50372 2.0 M10x20 LHCS 88.13 17800 50372 51016
54116 CAD 75.0 38.1 25.2 50.8 3.3 38.1 12.7 31.75 43.2 50374 2.5 M12x30 SHCS 135.58 26700 50374 21026
 
E† is the distance needed between the front of the clamp base and the work piece.
I* The distance from the top of the washer to the bottom of the clamp body.
Drill and tap the centerline of “B” for mounting holes.

D* – A milled slot wider than D dimension will insure clamp remains in line with workpiece. Clamp sides should not come in contact with slot walls during expansion.
F† The distance needed between workpieces for clamp clearance. Drill and tap mounting hole on the center of F dimension.

 

toe clamp drawing for workholding

See It In Action

Mittee-Bite Compact Toe Clamp Applications
 

 

AMROK - Your Workholding Integrator.
Build on the Rock.

Learn from Experts Download the catalog Request a Quote