 |
Dyna-Force® Workholding ClampsThe majority of the Dyna-Force® clamp is below the surface of the fixture which provides excellent clamp support and makes for a very low profile solution. The clamp jaw slides on an angle for positive downforce. The clamp jaw is available with serrated or smooth faces. The support surface of the Dyna-Force® clamp can be installed flush with the fixure plate, tombstone, or trunnion table or raised to hold the workpiece off the fixture, enabling drill-through. |
| Part No. | Clamp Jaw† & Hardiness | A* | B | C | D | E | F | — Min | G Opt. | — Max | Clamp Travel | Drive Screw | Key Size | Max Torque | Holding Force | Replacement Insert** | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 28314 | CAD | Smooth 34RC | 20.00 | 24.90 | 19.00 | 19.90 | 4.50 | 13.50 | 3.25 | 5.00 | 6.75 | 2.0 | M6x12mm | 5mm | 7.3 (Ft/Lbs) 9.9 (N.m) |
2,000 (Lbs) 8896 (N.) |
28480 (smooth) |
| 28318 | CAD | Serrated 44RC | 20.00 | 24.90 | 19.00 | 19.90 | 4.50 | 13.50 | 3.25 | 5.00 | 6.75 | 2.0 | M6x12mm | 5mm | 7.3 (Ft/Lbs) 9.9 (N.m) |
2,000 (Lbs) 8896 (N.) |
28482 (serrated) |
| 28320 | CAD | Smooth 34RC | 25.00 | 29.90 | 24.00 | 24.90 | 5.00 | 15.00 | 4.50 | 6.50 | 8.25 | 2.2 | M8x16mm | 6mm | 17.6 (Ft/Lbs) 23.9 (N.m) |
2,600 (Lbs) 11565 (N.) |
28484 (smooth) |
| 28322 | CAD | Serrated 44RC | 25.00 | 29.90 | 24.00 | 24.90 | 5.00 | 15.00 | 4.50 | 6.50 | 8.25 | 2.2 | M8x16mm | 6mm | 17.6 (Ft/Lbs) 23.9 (N.m) |
2,600 (Lbs) 11565 (N.) |
28486 (serrated) |
| 28324 | CAD | Smooth 34RC | 30.00 | 37.90 | 29.00 | 29.90 | 7.00 | 20.00 | 4.50 | 7.50 | 10.75 | 3.8 | M10x18mm | 8mm | 35.3 (Ft/Lbs) 41.9 (N.m) |
3,200 (Lbs) 14234 (N.) |
28488 (smooth) |
| 28328 | CAD | Serrated 44RC | 30.00 | 37.90 | 29.00 | 29.90 | 7.00 | 20.00 | 4.50 | 7.50 | 10.75 | 3.8 | M10x18mm | 8mm | 35.3 (Ft/Lbs) 41.9 (N.m) |
3,200 (Lbs) 14234 (N.) |
28490 (serrated) |
†Smooth jaw only will have relief cut
*Body diameter
**Includes screw and retaining ring
*Body diameter
**Includes screw and retaining ring
The Power Behind Dyna-Force®
• Incredible Clamping and Hold Down Power
• Low Profile, Compact Design
• 17-4 PH Stainless Steel
• Smooth or Serrated
• Stainless steel screws and retaining rings are available for EDM applications
See In In Action
Dyna-Force® Applications
