Mitee-Bite CNC Fixture Clamps


View CAD Library Download catalog ` Request a Quote
CAM CNC fixture 

Mitee-Bite Fixture Clamps

The Cam Action MITEE-BITE Fixture Clamp is made up of two simple components: a hardened steel socket cap screw with an offset head and a brass hexagonal washer.

  • Low profile for quick and easy installation for linear motion guide rails
  • Cam action provides fast, strong clamping
  • Small size allows more parts per load
  • Simple design keeps cost low
  • 50218 our most popular LMGR size – available in bulk


NOTE: Clockwise rotation is recommended. Locating pin should be on the right of workpiece.

Metric

Part No.ABCDEFGMax.
Torque
(N.M.)		Max.
Holding
Force(N)		No. of
Clamps
per Pack		Replacement
Cam Screw		Replacement
Hex Washer
50204 M 4 3 .76 7.93 2.80 9.6 3.80 2.0 910 10 50363 10580
50206 M 6 4 1.01 15.86 4.75 11.2 7.80 8.5 3558 10 50365 10582
50208 M 8 5 1.01 20.61 4.55 15.0 10.15 11.3 3558 12 50367 10584
50210 M10 7 1.27 20.61 6.35 19.0 10.15 28.0 8895 10 50369 10586
50212 M12 8 2.03 25.38 9.52 22.8 12.70 88.0 17790 8 50371 10590
50216 M16 12 2.54 30.13 12.70 28.5 15.00 125.0 26680 4 50373 10592
50218 M8 5 1.01 20.61 4.55 15.0 10.15 11.3 3,558 bulk 502181 10584

Stainless Steel
50214 M4 3 .76 7.93 2.80 9.6 3.80 2.0 910 4 50361 10581
50205 M6 4 1.01 15.86 4.75 11.2 7.80 8.50 3558 4 50364 10583
50207 M8 5 1.01 20.6 6.35 15.0 10.15 11.30 3558 4 50366 10585

H* – Clamp Travel 

mitee bite clamp drawing

See In In Action

Mitee-Bite Fixture Clamps Applications
 

 

AMROK - Your Workholding Integrator.
Build on the Rock.

Learn from Experts Download the catalog Request a Quote